|
Guide Way Wipers
We offer three types of wipers, 530mm long; other lengths according to individual requirements (max 3m). The preload of the wipers is 1mm. All three types can be supplied with a stainless steel pre-wiper The dimensions stated apply for mounted state.
Futures:
- Resistant to oils, coolants and hot shavings
- Resistant to wear caused by friction produced during scraping
- Wiper profile flexible over time.
- These consist of a Stainless steel housing to protect from shavings, and an inner profile of Polyurethane.
- For work environments with a heavy concentration of sharp shavings
- Built to drawings in any shape or size
- Solve the problem of small quantities since no expensive molds are used
- Polyurethane profile resists abrasion and is easily replaced
- We must have a drawing with measurements showing the profile of the guides on which they are to be mounted
- Pre-loading is determined by our engineering department based on the shape of the wiper
- The wiper measurements refer to free position without pre-load and it is Always necessary to indicate the distance measurement between fastening bore and guide plane to weap.
- For fastening, we recommend counter sunk hex screws
- Prompt delivery in standard linear strips
Note: Further Details of Dimension order form mail to us.
|
